IEC 60512-2-1 Ed. 1.0 b:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method standard by International Electrotechnical Commission, 02/22/2002
IEC 60512-4-3 Ed. 1.0 b:2002 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels standard by International Electrotechnical Commission, 02/22/2002
IEC 60512-4-2 Ed. 1.0 b:2002 Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge standard by International Electrotechnical Commission, 02/22/2002
IEC 60512-3-1 Ed. 1.0 b:2002 Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance standard by International Electrotechnical Commission, 02/22/2002
IEC 60512-2-6 Ed. 1.0 b:2002 Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity standard by International Electrotechnical Commission, 02/22/2002
IEC 60512-2-3 Ed. 1.0 b:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation standard by International Electrotechnical Commission, 02/22/2002
IEC 60512-11-4 Ed. 1.0 b:2002 Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature standard by International Electrotechnical Commission, 02/22/2002
IEC 60512-11-11 Ed. 1.0 b:2002 Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure standard by International Electrotechnical Commission, 02/22/2002
IEC 60512-11-3 Ed. 1.0 b:2002 Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state standard by International Electrotechnical Commission, 02/22/2002
IEC 60512-11-2 Ed. 1.0 b:2002 Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat standard by International Electrotechnical Commission, 02/22/2002
IEC 60512-6-4 Ed. 1.0 b:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal) standard by International Electrotechnical Commission, 02/22/2002
IEC 60512-6-3 Ed. 1.0 b:2002 Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock standard by International Electrotechnical Commission, 02/22/2002