Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Sale!
View larger
View larger
More info
Description / Abstract:
Introduction
Note: Nothing in this standard supercedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take precedence.
Purpose. The purpose of this test is to objectively measure the heated seat system in a seat assembly on a bench or in a vehicle. This test measures the seated surface when fully contacted by an occupant. Additionally this test verifies the logic and controls, when tested in conjunction with GMW16052, for the vehicle seat control system.
Applicability. This test procedure is applicable to all seating systems with heated seats.
Remarks. This test procedure is intended to measure the seat heater heat transfer to the top of the seat cover and occupant for validation of the seat subsystem. A vehicle level test can be conducted in conjunction with GMW16052 to include the complete seat control subsystem. When testing a seat subsystem outside of the vehicle, the vehicle logic needs to be simulated and applied at the heated seat module in order to verify the module in within the seat.
Note: Nothing in this standard supercedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take precedence.
Purpose. The purpose of this test is to objectively measure the heated seat system in a seat assembly on a bench or in a vehicle. This test measures the seated surface when fully contacted by an occupant. Additionally this test verifies the logic and controls, when tested in conjunction with GMW16052, for the vehicle seat control system.
Applicability. This test procedure is applicable to all seating systems with heated seats.
Remarks. This test procedure is intended to measure the seat heater heat transfer to the top of the seat cover and occupant for validation of the seat subsystem. A vehicle level test can be conducted in conjunction with GMW16052 to include the complete seat control subsystem. When testing a seat subsystem outside of the vehicle, the vehicle logic needs to be simulated and applied at the heated seat module in order to verify the module in within the seat.