Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Sale!
View larger
View larger
GMW17333
New product
GMW17333 1st Edition, July 1, 2015 Adhesive Compatibility Approval for Foam Tape
More info
Description / Abstract:
Introduction
Note: Nothing in this standard supercedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take precedence.
Purpose. This specification describes the process and requirements for obtaining GM Adhesive Compatibility Approval for exterior trim components using double coated foam tape as the primary method of attachment.
Applicability. Pressure-sensitive adhesive foam tapes.
Remarks. Approval is required prior to Integration Vehicle Engineering Release General Assembly Material Requirement Date (IVER GA MRD) in accordance with the latest revision level of this standard.
Approvals are specific to a substrate/adhesive combination. Cohesive failures are required to gain approval. If cohesive failure is not possible, a different adhesive must be chosen, or an adhesion promoter must be introduced prior to bonding.
All required testing within is considered design validation work and is to be performed at the plaque level. The product level Adhesive Application Approval (AAA) for individual parts is covered by GMW15625.
Note: Nothing in this standard supercedes applicable laws and regulations.
Note: In the event of conflict between the English and domestic language, the English language shall take precedence.
Purpose. This specification describes the process and requirements for obtaining GM Adhesive Compatibility Approval for exterior trim components using double coated foam tape as the primary method of attachment.
Applicability. Pressure-sensitive adhesive foam tapes.
Remarks. Approval is required prior to Integration Vehicle Engineering Release General Assembly Material Requirement Date (IVER GA MRD) in accordance with the latest revision level of this standard.
Approvals are specific to a substrate/adhesive combination. Cohesive failures are required to gain approval. If cohesive failure is not possible, a different adhesive must be chosen, or an adhesion promoter must be introduced prior to bonding.
All required testing within is considered design validation work and is to be performed at the plaque level. The product level Adhesive Application Approval (AAA) for individual parts is covered by GMW15625.