Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Sale!
View larger
View larger
More info
Description / Abstract:
Material Description. This specification
describes material types of polycarbonate copolymer that offer all
the attributes of standard polycarbonate (PC) resin with enhanced
weather resistance without the aid of a protective coating. Code
numbers distinguish between different levels of weatherability
based on color formulation and the applications requirements. Two
resin melt flow rates are available. For high flow grades, a suffix
indicating low molecular weight shall be added, see Table 3. This
specification is based on GMW3013 per ISO 7391-1/2
recommendations.
Paintability. Approved decorative paint systems that can be used on this material are listed in the General Motors Approved Paint on Parts Systems (GM APOPS) database.
Types. The standard properties are described in Table 1, the different levels of weather resistance properties are described in Table 2 and resin melt flow options are listed in Table 3. If no type designation is defined, Type 1 (T1), of highest level of weatherability, and standard resin melt flow, applies as the default standard.
Symbols. The material abbreviation according to ISO 11469 is PC.
Typical Applications. Typical applications include interior and exterior applications that are exposed to sunlight without an Ultraviolet (UV) protective coating. Not intended for use in optical lens applications for regulated exterior lighting, refer to GMW16729.
Paintability. Approved decorative paint systems that can be used on this material are listed in the General Motors Approved Paint on Parts Systems (GM APOPS) database.
Types. The standard properties are described in Table 1, the different levels of weather resistance properties are described in Table 2 and resin melt flow options are listed in Table 3. If no type designation is defined, Type 1 (T1), of highest level of weatherability, and standard resin melt flow, applies as the default standard.
Symbols. The material abbreviation according to ISO 11469 is PC.
Typical Applications. Typical applications include interior and exterior applications that are exposed to sunlight without an Ultraviolet (UV) protective coating. Not intended for use in optical lens applications for regulated exterior lighting, refer to GMW16729.